Magnetic car phone mount holding a phone on a car dashboard

Magnetic Car Phone Mount – Folding Dash Mount, 1080° Rotation

154,00 kr
Skip to product information
Magnetic car phone mount holding a phone on a car dashboard

Magnetic Car Phone Mount – Folding Dash Mount, 1080° Rotation

154,00 kr
Make it a kit
Just this oneFull price
Add a second item15% off the order
Add a third18% off the order

Applied at checkout. No code. Mix anything in the shop.

Arrives by Fri 18 Sep. Usually 5–10 days. Order before 16:00 CET and it ships today. Free shipping, no minimum.

  • 30-day returns
  • Tracked delivery
  • Fits any carUniversal — vent, USB or stick-on
  • Minutes to fitNo tools in almost every case
  • A real personAnswers within one business day

Almost everything here is universal — it plugs into a USB port, clips to an air vent, or sticks on. If you are not sure, email support@autogearia.com your make, model and year before you order. We check and tell you straight, including when the answer is no. We reply within one business day.

Usually nothing extra to pay. If a carrier bills you import VAT or duty, send us the paperwork and we cover it, so you never pay more than checkout.

Free shipping on every order — no minimum, no code, tracked the whole way. 30 days to change your mind.

Stick it down once. Then never fight a clamp again. Eight magnets grab your phone the moment it gets close — one hand, no looking.

There are no arms to squeeze, no cradle to line up, no spring to wear out. You bring the phone near the head and it snaps into place by itself. The arm then turns a full 1080°, so portrait for navigation and landscape for everything else is a flick of the wrist rather than a re-mount.

  • Eight N45 neodymium magnets — N45 is a high-strength neodymium grade, and eight of them in a head this size is a serious amount of hold
  • 1080° rotation — the arm swivels through three full turns, so any angle is reachable without unsticking the base
  • 3M adhesive gel base — presses onto a clean dashboard and stays there; nothing clipped to a vent to rattle or sag
  • Folds flat when you're done — drops out of your sightline instead of standing proud of the dash
  • Zinc alloy, ABS and silicone — a metal body, not a hollow plastic shell, and silicone where it touches your phone
  • 64.5 g — light enough that the adhesive isn't fighting the mount's own weight
  • Installs in about a minute — wipe the spot, press, done. No tools, no wiring, nothing to remove

Specs: 8 × N45 neodymium magnets · 1080° rotating arm · 3M adhesive gel base · Folding design · Zinc alloy / ABS / silicone · 64.5 g · Black · In the box: 1 × phone holder

Questions people ask before buying

Will my phone actually stick to it?

If your phone has magnets in the back it will — that covers MagSafe iPhones and any Qi2 or magnetic case. If your phone has no magnets, you'll need a thin stick-on metal plate between phone and case; they cost a couple of pounds anywhere. Worth checking before you order, because the mount holds metal, not plastic.

Where does it mount?

On the dashboard, using a 3M adhesive gel pad on the base. Clean and dry the spot first and give it a firm press — that's the whole install. It is not a vent clip, which is deliberate: vent mounts block your airflow and wobble every time you go over a bump.

Does a thick case stop it working?

Magnet strength falls off fast with distance, so a very thick case weakens the hold noticeably. Under about 3 mm you'll be fine. Above that, use a case with its own alignment magnets rather than relying on a plate buried under the plastic.

Goes well with: MagCharge 25W wireless mount · GripPad dash mat

Free shipping on every order — no minimum, no code. Tracked the whole way. Order before 16:00 CET and it ships the same day, arriving in about 5–10 days. 30-day returns, opened or not, plus the EU two-year statutory guarantee. If a carrier bills you an import fee, send us the paperwork and we cover it.
AutoGearia · Gothenburg, Sweden · support@autogearia.com, answered by a person within one business day.

Universal fit

It fits any car. Everything we stock is universal — it plugs into a USB port, clips to an air vent, or sticks on. No model-specific version to pick, no trim to remove, and in almost every case no tools.

The handful of items that have a size to check say so on this page, in the product information above. Still unsure? Send your make, model and year to support@autogearia.com — a real person answers within one business day, Mon–Fri.

Shipping & delivery

Free on every order. No minimum, no code, tracked from dispatch — there are no untracked shipments.

Order before 16:00 CET and it ships the same day. Typically 5–10 calendar days to arrive, wherever you are. Stock sits with fulfilment partners overseas — we would rather say so than quote a date we cannot keep.

We cover customs. If a carrier bills you an import fee, send us the paperwork and we pay it. Your order never costs more than the checkout total.

Easy returns

30 days to change your mind. Open it and try it — you do not need the original packaging.

Damaged or wrong? Send a photo within 7 days and keep the item.

Registered and operated from Sweden, under EU consumer law and a two-year statutory guarantee.

Why we picked it

Eight N45 magnets and a zinc alloy body, at a price where a hollow plastic shell is the norm. N45 is a high-strength neodymium grade, and the 1080° arm means you change angle with a flick rather than unsticking the base and starting again.

Worth knowing

It holds metal, not plastic. MagSafe iPhones and Qi2 or magnetic cases snap straight on; if your phone has no magnets you will need a thin stick-on metal plate, which is not in the box. Magnet strength also drops off fast with distance, so keep the case under about 3 mm.

This is our own assessment as the retailer. It is not a customer review.

Reviews

No reviews yet — we will not write them for you. Specs are checked against the supplier sheet. If you buy this, we will ask for a photo in week two.

Already bought one? Send a photo.

Add one of these and save 15%